!["2024 Approved Harnessing Power of EZ Grabber - Quick Start Guide to Usage"](https://www.lifewire.com/thmb/m4BcH-XQSOpQcuE-5vTn1swsxLE=/400x300/filters:no_upscale():max_bytes(150000):strip_icc():format(webp)/GettyImages-591408071-5bc7767d4cedfd0026a2ce3f.jpg)
"2024 Approved Harnessing Power of EZ Grabber - Quick Start Guide to Usage"
![](/images/site-logo.png)
Harnessing Power of EZ Grabber - Quick Start Guide to Usage
Are you a full-time gamer or like to rewatch some spectacular scenes from the movies or videos you see on your computer later? But are unable to record those moments separately and at that instant and later need to go back to that point of the scene to record the same. It might get a bit time-consuming and frustrating to do so. For this situation, the ideal problem solver would be installing the EZ grabber software on your computer.
The EZ grabber software is a piece of capturing equipment designed to capture MPEG that converts the images on screen into videos. You can easily record the videos on screen by clicking the rec button and connecting your device using an S-video connector or an AV. The resolution of the videos can touch the heights of 720p, which you can also edit and upload on the internet.
Part 1. How to download and install EZ Grabber?
After knowing about the EZ grabber windows 10 software, you might wonder how to download the software correctly on your computer. And install the same through following specific steps for it. That is why here in this article, we will direct you through the steps which, if you follow unconditionally, will let you enjoy the software: -
Step 1
When you have successfully downloaded EZ grabber software on your computer, the operating system will send you a new message that a new hardware device has been found on your device. Please click on the option cancel once you see that.
Step 2
Once you insert the CD, the operating system automatically asks you to click on the driver install option and run the setup.
Step 3
Click on the next button and then install. After installation, a finish option will appear, indicating the devices have been successfully installed.
Step 4
Ensure that DirectX9.0 has been installed before, or else the system will automatically prompt you to install the same.
Step 5
Then, click on the next button in front of you and continue installing the components until it’s done.
Step 6
Once the components are installed, prepare for the EZ grabber to get started and click on the next button.
Step 7
A box containing windows media format9 will appear when you click the yes option. Clicking on the yes will continue the installation of the Windows media format9.
Step 8
For the last step, the system will ask you to restart the device and click on the finish option. An icon representing the EZ grabber will appear on your device, indicating the application has been installed successfully.
Part 2. How to Use EZ Grabber?
Once you have downloaded and installed the EZ grabber 2 software application on your device, the next bit of information you might lack would be how to use the application properly. If you are new to any application, you might need some guidance that would help you open it and use the same conveniently without any problem. Let us look at various steps of using the EZ grabber software: -
Step 1 Recording
The application of EZ grabber mac‘s primary purpose would be using it for recording the content displayed on your screen. It saves the content in the form of MPEG to save space. Press the record button to start the recording and press the same to stop it. It would save the file by default.
Also, there are a few set-up options you may opt for:
Step 2 Screenshot
When you are watching something on the screen, press the snapshot button to capture the picture and save it in the form of .bmp format. The image will be saved automatically.
Step 3 Video Playing
Click on the screen recorder and choose to record your favorite scene of yours. Double-clicking on the same will display you where the video is saved.
Part 3. EZ Grabber Alternative to Record PC Screen
Suppose you still have problems using EZ grabber 2 or might not be satisfied by its functionality or quality. Then, there are many other options out there that could provide you with the same features in a more enhanced way. However, if you find choosing from all the different options challenging, then Filmora could be the perfect screencasting software.
Through Filmora, you can easily record all the activities on your desktop and share them with others. But you might not know how to use this software to record PC screen . That is why we have made a listicle of the steps by which you can easily use Filmora to record.
First of all, there are three ways through which you can record the computer screen by Filmora.
- **Method 1:**First, you can select the record on the PC screen button in the start-up window.
- Method 2: You can choose the following method: entering the player panel and clicking on the file option. Choose the record option available there and select from any Webcam, Record from the PC screen, and voiceover record.
- Method 3: The last way or method you can choose would be recording by combining all three methods from webcam, through the screen, and also voiceover.
Let us now look at the various steps through which you can record in Filmora: -
Free Download For Win 7 or later(64-bit)
Free Download For macOS 10.14 or later
Step 1
For the first step, you will see a rectangle icon on the left side of the Filmora screen recorder window. By clicking on it, you can start recording. There would be three options: Full screen, custom, and Target window; choose any one.
After that, click upon the microphone option and select the mic through which you start narrating your voice. Additionally, you will be able to disable the speaker option of the computer while in the recording session.
Step 2
- After the first step, you will see the settings option on the right lower corner of the screen recorder window. Click upon that option to know more.
- You can choose where you want the recording to be saved on your computer’s hard drive. You can also adjust the quality and frame rate per your preference through the Quality menu at the drop-down window.
Step 3
For the 3rd step, mark on the mouse checkbox that would offer you the option if you want to keep the mouse cursor on your video or not. Moreover, you can also expand the time or set the timing of the screen recording duration and put it into the record timer box.
Step 4
After completing all these steps, click on the recording button and initiate the new screen recording session. Once you do this, the recording will start after a three-second delay.
If you want to stop the recording in between or end the screencasting, press the F9 button. The file would be automatically saved on the Filmora folder, and you can edit the same after completing it.
Conclusion
Where you were facing problems recording videos on your screen and could not choose the right software to do it? Then hopefully, after reading the article, you can now choose to use EZ grabber software by downloading it from the internet, following the steps mentioned above. However, if you see that EZ grabber is not the one for you, we have also recommended Filmora. It might be the perfect one as it offers way more options to screen record and edit the same through your preferences.
Free Download For macOS 10.14 or later
Step 1
For the first step, you will see a rectangle icon on the left side of the Filmora screen recorder window. By clicking on it, you can start recording. There would be three options: Full screen, custom, and Target window; choose any one.
After that, click upon the microphone option and select the mic through which you start narrating your voice. Additionally, you will be able to disable the speaker option of the computer while in the recording session.
Step 2
- After the first step, you will see the settings option on the right lower corner of the screen recorder window. Click upon that option to know more.
- You can choose where you want the recording to be saved on your computer’s hard drive. You can also adjust the quality and frame rate per your preference through the Quality menu at the drop-down window.
Step 3
For the 3rd step, mark on the mouse checkbox that would offer you the option if you want to keep the mouse cursor on your video or not. Moreover, you can also expand the time or set the timing of the screen recording duration and put it into the record timer box.
Step 4
After completing all these steps, click on the recording button and initiate the new screen recording session. Once you do this, the recording will start after a three-second delay.
If you want to stop the recording in between or end the screencasting, press the F9 button. The file would be automatically saved on the Filmora folder, and you can edit the same after completing it.
Conclusion
Where you were facing problems recording videos on your screen and could not choose the right software to do it? Then hopefully, after reading the article, you can now choose to use EZ grabber software by downloading it from the internet, following the steps mentioned above. However, if you see that EZ grabber is not the one for you, we have also recommended Filmora. It might be the perfect one as it offers way more options to screen record and edit the same through your preferences.
Free Download For macOS 10.14 or later
Step 1
For the first step, you will see a rectangle icon on the left side of the Filmora screen recorder window. By clicking on it, you can start recording. There would be three options: Full screen, custom, and Target window; choose any one.
After that, click upon the microphone option and select the mic through which you start narrating your voice. Additionally, you will be able to disable the speaker option of the computer while in the recording session.
Step 2
- After the first step, you will see the settings option on the right lower corner of the screen recorder window. Click upon that option to know more.
- You can choose where you want the recording to be saved on your computer’s hard drive. You can also adjust the quality and frame rate per your preference through the Quality menu at the drop-down window.
Step 3
For the 3rd step, mark on the mouse checkbox that would offer you the option if you want to keep the mouse cursor on your video or not. Moreover, you can also expand the time or set the timing of the screen recording duration and put it into the record timer box.
Step 4
After completing all these steps, click on the recording button and initiate the new screen recording session. Once you do this, the recording will start after a three-second delay.
If you want to stop the recording in between or end the screencasting, press the F9 button. The file would be automatically saved on the Filmora folder, and you can edit the same after completing it.
Conclusion
Where you were facing problems recording videos on your screen and could not choose the right software to do it? Then hopefully, after reading the article, you can now choose to use EZ grabber software by downloading it from the internet, following the steps mentioned above. However, if you see that EZ grabber is not the one for you, we have also recommended Filmora. It might be the perfect one as it offers way more options to screen record and edit the same through your preferences.
Free Download For macOS 10.14 or later
Step 1
For the first step, you will see a rectangle icon on the left side of the Filmora screen recorder window. By clicking on it, you can start recording. There would be three options: Full screen, custom, and Target window; choose any one.
After that, click upon the microphone option and select the mic through which you start narrating your voice. Additionally, you will be able to disable the speaker option of the computer while in the recording session.
Step 2
- After the first step, you will see the settings option on the right lower corner of the screen recorder window. Click upon that option to know more.
- You can choose where you want the recording to be saved on your computer’s hard drive. You can also adjust the quality and frame rate per your preference through the Quality menu at the drop-down window.
Step 3
For the 3rd step, mark on the mouse checkbox that would offer you the option if you want to keep the mouse cursor on your video or not. Moreover, you can also expand the time or set the timing of the screen recording duration and put it into the record timer box.
Step 4
After completing all these steps, click on the recording button and initiate the new screen recording session. Once you do this, the recording will start after a three-second delay.
If you want to stop the recording in between or end the screencasting, press the F9 button. The file would be automatically saved on the Filmora folder, and you can edit the same after completing it.
Conclusion
Where you were facing problems recording videos on your screen and could not choose the right software to do it? Then hopefully, after reading the article, you can now choose to use EZ grabber software by downloading it from the internet, following the steps mentioned above. However, if you see that EZ grabber is not the one for you, we have also recommended Filmora. It might be the perfect one as it offers way more options to screen record and edit the same through your preferences.
Also read:
- "In 2024, Preserving Every Moment of Your Switch Gaming"
- "[New] In 2024, Crafting the Ideal MC Village Abode"
- "[Updated] In 2024, Essential Tips for Zoom Screen Sharing"
- "\"[Updated] Effortlessly Create a Cross-Platform Conversation Space on Skype A Detailed Manual for Users of All OS Platforms\""
- "\"In 2024, Accurate Speech-to-Text Google's Breakthrough Approach\""
- "\"[New] 2024 Approved Apex 10 Virtual Warrior Battles\""
- "\"2024 Approved Cutting-Edge Recording Gear The Ultimate Voice Recorders 2023\""
- "[Updated] Maximizing Game Replays in Roblox with macOS Tips for 2024"
- "\"In 2024, Precise Portrayal of Pixels Master Netflix Recordings with These 6 Mac Tactics\""
- "[Updated] In 2024, Essential List of Top 10 Live Stream Editors"
- "\"2024 Approved Screen Grab Gold 10 Top Tools for PC and Mac\""
- "\"[New] Pro-Free Mac Screen Logger\""
- "[Updated] The Secret to Professional Video Calls on Zoom for 2024"
- "The Ultimate Guide to MOV File Handling in Windows 11"
- "[New] Correcting Excessive Encoding in OBS"
- "\"[Updated] Ideal Video Editing Software Enhance Your Webcam Content for 2024\""
- "\"[Updated] Google Meet Entry On Computers/Mobile Phones\""
- "[New] In 2024, Focused Communication Tips for Virtual Teams"
- "\"The Future of Video Recording Insights Into Fraps for 2024\""
- "\"[New] 2024 Approved Mastery in Video Creation Using Captivate Software\""
- "\"[Updated] In 2024, Pro's Picks Top 10 Spotify Recording Applications\""
- "\"[New] In 2024, Virtual Warriors’ Journey - 7 Intense FPS Games\""
- "In 2024, Discovering the Best Webcams for Smart Investment"
- "In 2024, Essential Steps in Using Streamlabs OBS Successfully"
- "\"[New] 'FrameMaker' Screen Capturing Mastery Review, 2023 Edition\""
- "\"Top Time-Lapse Techniques & Tools #5 for 2024\""
- "\"Taming Echoes Syncing Voices to OBS Channel\""
- "\"[New] Pro Tech's Picks The Most Excellent Screen Recorder Apps\""
- "[New] Simple Steps for Android Voice Recording (No Root) for 2024"
- "\"[Updated] In 2024, Educator's Guide Top Screen Capture Tools\""
- "[New] In 2024, Simplifying Remote Work with Zoom Recording Techniques"
- "In 2024, Innovative Approaches to Facecam Recording Techniques"
- "\"X-Voice Sync Studio, Windows Version for 2024\""
- "\"[New] Hands-On Approach to iOS Audio Capture for 2024\""
- "[Updated] A Practical Guide to Saving Screens on Dell Computers"
- "Premiere 10 Battle Royale Titles"
- "[New] Essential Skills for Effective Faces on Camera"
- "\"Narratives Unleashed #10 Adventure Games Reviewed\""
- "\"2024 Approved Step Into Professionalism Aiseesoft's Screen Recording Made Accessible\""
- "\"[Updated] The Best Open-Source Screen Recorders\""
- "\"[New] In 2024, The Best Screen Recorder Apowersoft vs Others\""
- "\"[Updated] Premier Online Calling Apps - All Free & User-Friendly for 2024\""
- "\"[New] ProVideoCapture Pro 10+ Features & Functionality Overview for 2024\""
- "\"2024 Approved Achieve Superior Zoom Sound 2 Essential Tweaks Explored\""
- "\"[New] Mastering Video Capture Bandicam’s Edge Over Camtasia\""
- "\"State-of-the-Art Gametime Documentation Tools\""
- "[New] The 4 Fastest Lenovo Record Methods for 2024"
- "\"In 2024, Navigating Bandicam - A Must-Read Guide\""
- 5 Easy Ways to Copy Contacts from Honor X7b to iPhone 14 and 15 | Dr.fone
- In 2024, How to use Snapchat Location Spoofer to Protect Your Privacy On Nokia XR21? | Dr.fone
- New Cartoonify Your Life Best Mobile Apps for Fun Photo Editing for 2024
- 2024 Approved Audio Waveform Video Generation Made Easy Top Online Options
- In 2024, Set Your Preferred Job Location on LinkedIn App of your Samsung Galaxy A23 5G | Dr.fone
- Does Life360 Notify When You Log Out On Huawei Nova Y71? | Dr.fone
- In 2024, Mastering Audio Balance Achieving Consistent Volume Levels with VLC Media Player
- In 2024, 4 Effective Methods Fake GPS Location on Apple iPhone 14 Pro Max/iPad | Dr.fone
- Updated Pause Perfection A Step-by-Step Guide to Freezing Frames in Videos
- Updated Download Lumafusion for Mac or Choose From These Top Alternatives for 2024
- In 2024, How to Fix Locked Apple ID from Apple iPhone 14 Pro Max
- In 2024, AddROM Bypass An Android Tool to Unlock FRP Lock Screen For your Vivo Y100i
- Top 4 Android System Repair Software for Nokia C12 Plus Bricked Devices | Dr.fone
- How to Turn Off Find My Apple iPhone 6s when Phone is Broken? | Dr.fone
- In 2024, Is Fake GPS Location Spoofer a Good Choice On Xiaomi Redmi 12 5G? | Dr.fone
- How to Transfer Photos from Honor 90 to New Android? | Dr.fone
- How to Bypass FRP from Lava Storm 5G?
- 7 Solutions to Fix Error Code 963 on Google Play Of OnePlus Nord CE 3 5G | Dr.fone
- 2024 Approved All About Types of Motion Graphics
- New 2024 Approved Kids in the Directors Chair Making Movies Made Easy
- 5 Ways to Restart Lava Blaze Curve 5G Without Power Button | Dr.fone
- In 2024, Top Apps and Online Tools To Track Vivo Y36 Phone With/Without IMEI Number
- New Unleash Your Creativity 20 Best Adobe Premiere Title Templates Free Download
- In 2024, How to Hide/Fake Snapchat Location on Your Poco C51 | Dr.fone
- Google Play Services Wont Update? 12 Fixes are Here on Nokia C210 | Dr.fone
- Top 15 Apps To Hack WiFi Password On Infinix Smart 8
- Additional Tips About Sinnoh Stone For Tecno Spark Go (2024) | Dr.fone
- In 2024, A Step-by-Step Process to Remove Audio in MP4 Videos
- Updated In 2024, How to Make Flying Objects in Wondershare Filmora
- New 2024 Approved Video Resumes Can Be Quite Effective if Used in the Right Context, and that Is the Reason Why Weve Decided to Take You Through some of the Best Video Resume Makers You Can Use to Get the Job Youve A
- In 2024, New Multiple Ways How To Remove iCloud Activation Lock On your iPhone 15 Pro
- In 2024, How To Remove Screen Lock PIN On Xiaomi Mix Fold 3 Like A Pro 5 Easy Ways
- Title: "2024 Approved Harnessing Power of EZ Grabber - Quick Start Guide to Usage"
- Author: Jane
- Created at : 2024-05-18 12:01:31
- Updated at : 2024-05-19 12:01:31
- Link: https://screen-activity-recording.techidaily.com/2024-approved-harnessing-power-of-ez-grabber-quick-start-guide-to-usage/
- License: This work is licensed under CC BY-NC-SA 4.0.